Avant CK-7
Product Description
The AVANTONE “Cabernet (C-series)” mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.
The AVANTONE CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the very finest FET mics…but at a fraction of their cost!
Our rugged CK-7 microphone body and capsule assembly are precision machined of BRASS.
Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill.
The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.
Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.
Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
The versatile CK-7 mic is able to produce professional results with a warm, pleasing sonic character.
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
3-Pattern CLASS A FET Microphone w/ dual 35mm gold sputtered thin Mylar capsules
-10 dB pad & 80 Hz LF roll off switches
Standard Included Items:
AVANTONE CK-7 Multi-Pattern FET Microphone
AVANTONE Custom Retro Shockmount
Elegant padded genuine wooden Mic box
Padded Aluminum storage / travel case
Owners Manual
Uses Include:
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic, etc…
The 3 patterns allow the CK-7 to be used in a variety of situations. The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides.
The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.
The AVANTONE CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the very finest FET mics…but at a fraction of their cost!
Our rugged CK-7 microphone body and capsule assembly are precision machined of BRASS.
Aesthetically, it features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and grill.
The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.
Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.
Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
The versatile CK-7 mic is able to produce professional results with a warm, pleasing sonic character.
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
3-Pattern CLASS A FET Microphone w/ dual 35mm gold sputtered thin Mylar capsules
-10 dB pad & 80 Hz LF roll off switches
Standard Included Items:
AVANTONE CK-7 Multi-Pattern FET Microphone
AVANTONE Custom Retro Shockmount
Elegant padded genuine wooden Mic box
Padded Aluminum storage / travel case
Owners Manual
Uses Include:
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic, etc…
The 3 patterns allow the CK-7 to be used in a variety of situations. The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides.
The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.
The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track.
PLEASE NOTE:
*Items are priced PER INDIVIDUAL UNIT (not case or carton) unless specifically stated as otherwise. IN-STORE prices may vary from ONLINE prices. Not responsible for typographical errors or shopping cart glitches and prices are subject to change without notice.
*NEXT DAY AIR AND ALL EXPEDITED ORDERS MUST BE RECEIVED BY 3:00PM CENTRAL TIME OR WE CANNOT GUARANTEE SHIPMENT.
*Credit card orders must ship to an address associated with the card. Please contact your credit card company in advance if you wish to ship to an alternate address otherwise your order may be flagged as possible fraud. Paypal accounts must be confirmed.
*Our shipping calculator does not cover all scenarios such as APO/FPO addresses and some international shipments. We will notify you of any issues concerning your shipment. If you have any concern or special needs (APO/FPO, international discounts), please e-mail or call for a quote!
*Please be aware that charges for international shipping and charges for expedited shipping on items for which we offer free ground shipping only will be added to your order AFTER CHECKOUT. Ground freight charges for items with free ground shipping will be deducted BEFORE your account is charged.
*If you have any concerns, please call or e-mail us with any questions. Texas residents must add sales tax of 6% (8.25% in Austin) unless eligible for an exemption. Feel free to contact us for a quote. For more information on shipping costs, please see the PRICING/SHIPPING/RETURNS TAB to the left of your screen.
Online Order Customer Service Customer Service (Remove SPAM filter)
We make effort to respond to all inquires as quickly as possible but if for any reason you do not get a timely response, please call us at 512-443-3911.
Not finding what you're looking for? Our online shopping cart is growing but many items haven't been uploaded into the shopping cart yet. We are authorized dealers for all major brands of media and supplies plus several equipment lines, so if you don't see what you need, give us a call or drop us an e-mail at Mr. Tapeguy. (Remove SPAM filter) Check out our main website http://www.pro-tape.com for more products plus industry news, technical tips and links to manufacturers, publications and more!
This website @2008 by Pro-Tape. Unauthorized duplication of its contents without written permission is strictly prohibited and will be prosecuted.
